Professional Scotchlok Connector Crimping Pliers

#ad
Miular #ad - Crimp and seat UG, UR and UY connectors. Crimps and seats ug, ur and UY connectors with spring loaded and cutter-u shape cutting knives. Fit for crimping plastic-insulated telecommunication or signal cables using the u-contact principle in single scotchlok connectors. For crimping plastic-insulated telecommunication or signal cables using the u-contact principle in single scotchlok connectors.

Spring-loaded action for self-opening; Handle Type: Plastic-Dipped. Made of high-strength stainless steel, heavy duty and durable. Crimping pliers with cutter-u shape.

#ad



3M Scotchlok IDC Butt Connector, 100 Pack Red

#ad
3M #ad - For more information go to www. P65warnings. Ca. Gov. The ur2 connectors are filled with a sealant to provide moisture resistance. Idc butt connector the ur2/ur2-d solvent resistant connectors accept two or three solid copper conductors that can be of different wire gauges, for butt splicing. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

#ad



3M Scotchlok IDC Butt Connector, 100 Pack Yellow

#ad
3M #ad - Their two ports accept two solid copper conductors that can be of different wire gauges. For more information go to www. P65warnings. Ca. Gov. In addition, the uy2 connector is available in a dry version, UY2-D connector. To a minimum. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm.

3M Scotchlok IDC Butt Connector, 100 Pack Yellow #ad - Full description » The connector is filled with a sealant to provide moisture resistance. Scotchlok tm; idc butt connector uy2 box the small size of the UY2/UY2-D solvent resistant connectors reduces the splicing bundle O. D.

#ad



Jonard JIC-891 Connector Crimping Plier with Side Cutter, 5-13/16" Length

#ad
Jonard Industries JIC-891 #ad - 1/2" cutter length. Comes with side cutter and yellow handle 5 13/16" long. Jaw measures 1" length by 13/16" width by 3/8" thickness. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. Comes with side cutter and yellow handle 5-13/16" long.

Jonard JIC-891 Connector Crimping Plier with Side Cutter, 5-13/16" Length #ad - A special stop behind cut out prevents damage to connectors. Also known as PRESSINGC. Jaw measures 1" length by 13/16" width by 3/8" thickness. Connector-crimping plier with side cutter designed to press UG, crimping "B" type connectors, 709 series connectors, UR, UY, and AMP tel splice connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire.

Connector-crimping plier with side cutter designed to press UG, UR, UY, crimping "B" type connectors, 709 series connectors, and AMP tel splice connectors. A special stop behind cut out prevents damage to connectors.

#ad



Jonard Tools M-216C/EX, Impact Resistant Hex Can Wrench with 7/16" and 3/8" Hex Sockets and Ergonomic Handle

#ad
Jonard Tools M-216C/EX #ad - Ergonomic handle: the 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange. Lifetime warranty: Jonard Tools makes high quality products that are Made For Life. The jonard tools m-216c/ex ergonomic can wrench is designed to fit over long binding posts and is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals.

Convenient design: sockets are thin-walled so they can access tight spaces such as locking devices on terminals and cabinets. High durability: Made of heat treated alloy steel sockets for longer life and durability. Comes with side cutter and yellow handle 5-13/16" long. Jaw measures 1" length by 13/16" width by 3/8" thickness.

Jonard Tools M-216C/EX, Impact Resistant Hex Can Wrench with 7/16" and 3/8" Hex Sockets and Ergonomic Handle #ad - Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. The can wrench features the following: 1 hex shape on outside of sockets can be used with a wrench to maximize torque, crimping "b" type connectors, 709 series connectors, 4 Total length is 7” with 1 1/4” 32 mm deep sockets to fit over long binding posts, 5 Heat treated alloy steel sockets provide long life and durability Connector-crimping plier with side cutter designed to press UG, UY, 3 Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets, 2 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange, UR, and AMP tel splice connectors.

A special stop behind cut out prevents damage to connectors. Long length: total length is 7 inches with 1 1/4 inch 31.

#ad



200pack, UY Wire to Wire Connector K1

#ad
SMITON 8541770496 #ad - Uy1 wire Connector. 1. Used to connect two wires safely and rapidly with moisture proof. Ergonomic handle: the 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange. 2. Applied to the conductors with inner diameter of 04-07mm 3.

Can connect the cable directly 4. Lifetime warranty: Jonard Tools makes high quality products that are Made For Life. Wire to wire connector. K1 wire connector. Jaw measures 1" length by 13/16" width by 3/8" thickness. Uy connectors should be used for wires with external coat up to 1. 52mm in diameter  6. There are uy, ur, uy2, udw2 type etc connector-crimping plier with side cutter designed to press UG, UY, 709 series connectors, crimping "B" type connectors, UR, and AMP tel splice connectors.

200pack, UY Wire to Wire Connector K1 #ad - A special stop behind cut out prevents damage to connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. Uy connectors enable connecting wires without the need of isolation stripping. Long length: total length is 7 inches with 1 1/4 inch 31.

#ad



3MTM ScotchlokTM Electrical IDC 905-BOX, Double Run or Tap, Low Voltage Automotive Applications, Red, 22-18 AWG Tap, 18-14 AWG Run, 50 per carton

#ad
3M #ad - Lifetime warranty: Jonard Tools makes high quality products that are Made For Life. Ergonomic handle: the 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange. The suggested application tool for this connector is the E-9BM Crimping Tool.

Uy1 wire Connector. Wire to wire connector. Long length: total length is 7 inches with 1 1/4 inch 31. 75 mm deep sockets to fit over long binding posts. 50 per box connector-crimping plier with side cutter designed to press UG, crimping "B" type connectors, UY, UR, 709 series connectors, and AMP tel splice connectors.

3MTM ScotchlokTM Electrical IDC 905-BOX, Double Run or Tap, Low Voltage Automotive Applications, Red, 22-18 AWG Tap, 18-14 AWG Run, 50 per carton #ad - A special stop behind cut out prevents damage to connectors. High durability: Made of heat treated alloy steel sockets for longer life and durability. Uy connectors should be used for wires with external coat up to 1. 52mm in diameter. Usa. Applied to the conductors with inner diameter of 04-07mm.

#ad



3MTM ScotchlokTM Electrical IDC Connector 560B, Blue, 18-16AWG solid/stranded, 14AWG stranded, 100ct

#ad
3M 80000209603 #ad - Usa. Its design lets you use it with 18 to 16 AWG solid or stranded wire for taps or 14 AWG stranded for runs. Tap into a range of wiring with this 3M Scotchlok 560B IDC Double Run or Tap Connector. Makes it simple to connect a tap wire to a run through wire electrically via a self-sealing and self stripping design.

Connector-crimping plier with side cutter designed to press UG, 709 series connectors, UR, crimping "B" type connectors, UY, and AMP tel splice connectors. A special stop behind cut out prevents damage to connectors. Uy connectors should be used for wires with external coat up to 1. 52mm in diameter. Comes with side cutter and yellow handle 5-13/16" long.

3MTM ScotchlokTM Electrical IDC Connector 560B, Blue, 18-16AWG solid/stranded, 14AWG stranded, 100ct #ad - High durability: Made of heat treated alloy steel sockets for longer life and durability. Ergonomic handle: the 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire.

. High performing polypropylene insulation ensures there are no shorts, making it ideal for complex circuits when used for parallel splicing or a tap wire. Applied to the conductors with inner diameter of 0

#ad



Jonard ES-1964 Carbon Steel Electrician Scissor, for Heavy Duty Use

#ad
Jonard Industries ES-1964 #ad - The electrician Scissors are designed for heavy duty use. Jaw measures 1" length by 13/16" width by 3/8" thickness. Made of high carbon steel with a special hardening process for greater durability and nickel plated for that professional look. High performing polypropylene insulation ensures there are no shorts, making it ideal for complex circuits when used for parallel splicing or a tap wire.

Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Lifetime warranty: Jonard Tools makes high quality products that are Made For Life. Applied to the conductors with inner diameter of 04-07mm. Usa. Convenient design: sockets are thin-walled so they can access tight spaces such as locking devices on terminals and cabinets.

Jonard ES-1964 Carbon Steel Electrician Scissor, for Heavy Duty Use #ad - Electrician scissors are designed for heavy duty use. Easy conductivity is assured thanks to the brass element construction, and it's plated with tin for powerful corrosion resistance. Special hardening process for greater durability and nickel plated for that professional look. Its design lets you use it with 18 to 16 AWG solid or stranded wire for taps or 14 AWG stranded for runs.

Uy1 wire Connector.

#ad



Fluke Networks Need L Lock Pliers

#ad
Fluke Networks 11294000 #ad - Ergonomic handle: the 7/8 inch diameter impact resistant thermoplastic handle is ergonomically designed for increased comfort and torque and color coded orange. These 6. 5-inch 16. 5 cm needle-nose crimping pliers are forged of high-quality steel with rubber-coated ergonomic handles for a reliable, non-slip grip.

Uy1 wire Connector. Its design lets you use it with 18 to 16 AWG solid or stranded wire for taps or 14 AWG stranded for runs. Wire to wire connector. Convenient design: sockets are thin-walled so they can access tight spaces such as locking devices on terminals and cabinets. Ur/uy/ug connector crimper. Made of high carbon steel.

Fluke Networks Need L Lock Pliers #ad - Jaws are grooved to provide a better grip on wires. Uy connectors should be used for wires with external coat up to 1. 52mm in diameter. Lifetime warranty: Jonard Tools makes high quality products that are Made For Life. High performing polypropylene insulation ensures there are no shorts, making it ideal for complex circuits when used for parallel splicing or a tap wire.

Electrician scissors are designed for heavy duty use. Comes with side cutter and yellow handle 5-13/16" long.

#ad



CESS Wire Scotch Lock Igniter Butt Connector for Telephone Network Lines 1000 Pack

#ad
CESS USA CO. cnt03 #ad - Moisture resistant connector accepts two solid copper conductors of different wire gauges. Wire to wire connector. It is sealed and protects against corrosion. It has temperature rating of 285 deg F. Comes with side cutter and yellow handle 5-13/16" long. Holds edge even when used on fiber and kevlar based cables.

It is used on used on standard polyethylene wire insulation. High durability: Made of heat treated alloy steel sockets for longer life and durability. Connector is RUS listed. Made of high carbon steel. Applied to the conductors with inner diameter of 04-07mm. High performing polypropylene insulation ensures there are no shorts, making it ideal for complex circuits when used for parallel splicing or a tap wire.

CESS Wire Scotch Lock Igniter Butt Connector for Telephone Network Lines 1000 Pack #ad - Connector-crimping plier with side cutter designed to press UG, crimping "B" type connectors, UR, 709 series connectors, UY, and AMP tel splice connectors. A special stop behind cut out prevents damage to connectors. It is sealed and protects against corrosion. Electrician scissors are designed for heavy duty use.

Moisture resistant connector accepts two solid copper conductors of different wire gauges.

#ad