Motivx Tools Engine Oil Funnel for Honda, Acura, and Some Ford Engines with Threaded Oil Filler Caps

#ad
Motivx Tools MX2303 #ad - Questions & answers why do i need this funnel? We aren't saying traditional funnels don't work, but our funnels can make for easier and cleaner oil changes for not a lot of money. The "no funnel" approach - We've all probably been guilty of this. You can also leave single quarts of oil in the funnel to completely drain while retrieving and opening the next one.

Will this funnel fit my vehicle?This will fit Honda, Acura, and Ford vehicles that have threaded oil filler caps. This funnel stays where it's supposed to so you have both hands to work with. Say goodbye to spills and that burning oil smell. It seals to the engine with a rubber gasket so even if you pour oil in faster than it can drain down into the engine it won't leak.

Motivx Tools Engine Oil Funnel for Honda, Acura, and Some Ford Engines with Threaded Oil Filler Caps #ad - Many times these funnels require you to hold them the entire time, otherwise they tend to fall over. The "motivx tools engine oil funnel" approach - Since this funnel screws into the oil fill port, it doesn't require any holding whatsoever so you are free to use both hands. For newer fords with the 1/4 turn style cap you will need our MX2306 funnel.

No more holding your funnel in place while pouring oil into the engine. This oil funnel threads onto the engine in place of the oil filler cap. The funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak.

#ad



Motivx Tools Engine Oil Funnel for Ford Vehicles with 1/4 Turn Oil Filler Caps

#ad
Motivx Tools #ad - This is easier on some engines than others, but usually results in at least some spilled oil. The "regular funnel" approach - unless you can find a funnel that will friction fit into the oil fill port, they are usually too long and end up touching a baffle or something else causing restricted oil flow. You can also leave single quarts of oil in the funnel to completely drain while retrieving and opening the next one.

Will this funnel fit my vehicle?Check to make sure you have the 1/4 turn style oil filler cap, not the type with traditional threads. Questions & answers why do i need this funnel? We aren't saying traditional funnels don't work, but our funnels can make for easier and cleaner oil changes for not a lot of money.

The "no funnel" approach - We've all probably been guilty of this. Since they don't seal, if you pour oil in faster than it can drain down into the engine oil might overflow. Your cap should look like the base of the funnel. This is thinking you can pour a full quart of engine oil into the engine through the small hole in the valve cover from some distance above it.

Motivx Tools Engine Oil Funnel for Ford Vehicles with 1/4 Turn Oil Filler Caps #ad - Check the style of your oil filler cap before ordering. No more holding your funnel in place while pouring oil into the engine - this funnel stays where it's supposed to so you have both hands free to work with. Say goodbye to spills and that burning oil smell - this funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak.

#ad



Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More - 20-Pack of Oil Crush Washers/Drain Plug Gaskets compatible with Honda - compatible with OEM 94109-14000 - By Mission Automotive

#ad
Mission Automotive MA777 #ad - We have no affiliation with or endorsement from any of the other manufacturers mentioned. The honda tm brand names and logos are the registered trademarks of their owners. These washers are compatible with most honda models, accord Crosstour, Civic, Accord Hybrid, including Accord, Civic Hybrid, Civic GX, Crosstour, Civic Si, CR-V only pre-2011.

Check the style of your oil filler cap before ordering. No more holding your funnel in place while pouring oil into the engine - this funnel stays where it's supposed to so you have both hands free to work with. Say goodbye to spills and that burning oil smell - this funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak.

With it's heavy duty construction this funnel will last the life of your vehicle - the bottom chamber is constructed with very thick, heavy duty plastic and the upper portion is highly durable yet flexible. Perfect replacement: mission automotive oil crush washers / drain plug gaskets are a compatible replacement for your Honda OEM washer / gasket.

Our washers meet or exceed the quality of OEM gaskets based on in-house testing. Does not fit 2011+, element, civic, crosstour, insight hybrid, del sol, accord hybrid, civic gx, cr-x, cr-z, Civic Hybrid, CR-Z Hybrid, Accord Crosstour, Fit, FCX Clarity, including Accord, Pilot, Prelude, Fit Hybrid, Ridgeline, S2000 and many motorcycle models.

Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More - 20-Pack of Oil Crush Washers/Drain Plug Gaskets compatible with Honda - compatible with OEM 94109-14000 - By Mission Automotive #ad - Value pack of 20: don't spend more than you have to on overpriced OEM parts - our value pack of 20 is an excellent value whether you're a professional mechanic or simply someone who likes to do it yourself! Wide compatibility: these washers are compatible with most honda models, insight, hr-v, odyssey, passport, civic si, cr-v only pre-2011.

#ad



EPAuto Spill Proof Radiator Coolant Filling Funnel Kit

#ad
EPAuto 13 #ad - Strict quality standards: our washers are designed and constructed to strict quality standards and made from high quality materials, ensuring proper fit with the drain plug and creating a tight seal. Our washers meet or exceed the quality of OEM gaskets based on in-house testing. Allows color matching of caps for dedicated adapters.

Cooling system fill kit prevents spills and trapped air. 3. Package includes: lid funnel 45 degree elbow x 2 fluid stopper 5 inches straight extension large cap a medium cap b small cap C Threaded Cap D Large Adapter A with Gasket Medium Adapter B with Gasket Small Adapter C with Gasket Threaded Cap Adapter D with Gasket for GM Threaded Cap Adapter E with Gasket for Ford Instruction: 1.

EPAuto Spill Proof Radiator Coolant Filling Funnel Kit #ad - Wide compatibility: these washers are compatible with most honda models, passport, hr-v, insight, odyssey, civic si, cr-v only pre-2011. Trapped air pockets may cause erratic cooling system and heater performance. 5" extension bar and 45° Elbow allow access to caps under shrouds or at an angle. Uspto patent no: us20180155175.

When run the engine with funnel attached, fluid level should be at low position. 2. Fill funnel slowly and carefully with coolant about 1/3 full.

#ad



OTC Tools 5911A Drain Plug Pro Magnetic Remover

#ad
OTC Tools 5911A #ad - Our washers meet or exceed the quality of OEM gaskets based on in-house testing. For a simple repair or the most complex drivability concern, and at better value, these award-winning tools universally solve problems faster, than any other product line available. The flexible shaft can be used in virtually any location and held at just about any position and still thread or unthread the plug as desired - all while keeping your hand out of the oil stream.

An added feature of the 5911a is a removable magnetic end with a 1/4 inch square drive - when removed, the Drain Plug Pro becomes a flexible shaft 1/4 inch bit driver. Check the style of your oil filler cap before ordering. No more holding your funnel in place while pouring oil into the engine - this funnel stays where it's supposed to so you have both hands free to work with.

Say goodbye to spills and that burning oil smell - this funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak. With it's heavy duty construction this funnel will last the life of your vehicle - the bottom chamber is constructed with very thick, heavy duty plastic and the upper portion is highly durable yet flexible.

OTC Tools 5911A Drain Plug Pro Magnetic Remover #ad - Perfect replacement: mission automotive oil crush washers / drain plug gaskets are a compatible replacement for your Honda OEM washer / gasket. Designed and manufactured with durable materials and intended for repetitive daily use. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

Ideal for oil changes and oil filter replacements.

#ad



Professional Quality 16 Quart Capacity for Changing Car and Truck Motor Oil, Transmission Fluid, Antifreeze Coolant, Drip Catching, and Automotive Waste Disposal - Motivx Tools Engine Oil Drain Pan

#ad
Motivx Tools #ad - This oil funnel threads onto the engine in place of the oil filler cap - fits most late model Ford vehicles that use the 1/4 turn style oil filler cap, not for engines with the threaded style cap. It can also be used as a drip catch tray and is an essential tool to help keep the garage or shop floor clean.

Please note: this product is produced by mission automotive Parts. Strict quality standards: our washers are designed and constructed to strict quality standards and made from high quality materials, ensuring proper fit with the drain plug and creating a tight seal. Trapped air pockets may cause erratic cooling system and heater performance.

5" extension bar and 45° Elbow allow access to caps under shrouds or at an angle. Uspto patent no: us20180155175. Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened. The motivx tools 16 quart professional quality oil drain pan is perfect for draining engine oil, and other fluids from cars, transmission fluid, antifreeze, tractors, trucks, and more.

Professional Quality 16 Quart Capacity for Changing Car and Truck Motor Oil, Transmission Fluid, Antifreeze Coolant, Drip Catching, and Automotive Waste Disposal - Motivx Tools Engine Oil Drain Pan #ad - The flexible shaft can be used in virtually any location and held at just about any position and still thread or unthread the plug as desired - all while keeping your hand out of the oil stream. We have no affiliation with or endorsement from any of the other manufacturers mentioned. Allows color matching of caps for dedicated adapters.

#ad



EWK 3/8 inch 64mm 65mm 14 Flute Oil Filter Wrench for Toyota Scion Honda Lexus

#ad
EWK EB0042 #ad - 64mm inner diameter measured from one flute to the opposite flute. Customer Service: 1. This oil filter socket wrench is 65mm when measured from a cornered line to the opposite cornered line. Wide application-the oil filter wrench fits toyota, highlander 4 cyl, celia, gs450h, gs300, prius, lexus, ls460, corolla, tc, scion, yaris; scion, nissan, sienna, V6, paseo, Tercel, Solara, gs350, V6 MR2, Echo, xa, Avalon, xd; lexus es350, is350, Honda, ls600h l, and Infinite.

Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition. 3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States. Designed for repetitive daily use and backed with a Lifetime Warranty. Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened.

EWK 3/8 inch 64mm 65mm 14 Flute Oil Filter Wrench for Toyota Scion Honda Lexus #ad - Orders placed after friday AM8:00 or national holiday will be shipped on the coming business day. 2. Does not fit 2011+, cr-z hybrid, element, crosstour, civic gx, pilot, cr-z, fit, cr-x, insight hybrid, ridgeline, Fit Hybrid, FCX Clarity, Accord Crosstour, Civic Hybrid, including Accord, Prelude, Accord Hybrid, Del Sol, Civic, S2000 and many motorcycle models.

Value pack of 20: don't spend more than you have to on overpriced OEM parts - our value pack of 20 is an excellent value whether you're a professional mechanic or simply someone who likes to do it yourself! Allows color matching of caps for dedicated adapters.

#ad



Honda 07AAA-PLCA100 Wrench Filter 65Mm

#ad
Honda 07AAA-PLCA100 #ad - Allows color matching of caps for dedicated adapters. Cooling system fill kit prevents spills and trapped air. Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened. Designed for repetitive daily use and backed with a Lifetime Warranty.

Check the style of your oil filler cap before ordering. No more holding your funnel in place while pouring oil into the engine - this funnel stays where it's supposed to so you have both hands free to work with. Say goodbye to spills and that burning oil smell - this funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak.

With it's heavy duty construction this funnel will last the life of your vehicle - the bottom chamber is constructed with very thick, heavy duty plastic and the upper portion is highly durable yet flexible. Perfect replacement: mission automotive oil crush washers / drain plug gaskets are a compatible replacement for your Honda OEM washer / gasket.

Honda 07AAA-PLCA100 Wrench Filter 65Mm #ad - This oil filter socket wrench is 65mm when measured from a cornered line to the opposite cornered line. Wide application-the oil filter wrench fits toyota, honda, tc, ls460, avalon, echo, v6, lexus, highlander 4 cyl, gs350, Solara, prius, paseo, yaris; scion, celia, Tercel, xd; lexus es350, corolla, nissan, V6 MR2, is350, scion, xa, sienna, ls600h l, GS450h, gs300, and Infinite.

This versatile tool magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping or getting burned by hot oil. Heavy duty construction - made from heavy duty polyethylene with a reinforced bottom, this oil drain pan will stand up to daily use in a professional environment.

#ad



Lisle 19732 Plastic Oil Dispenser - 6 Quarts

#ad
Lisle 19732 #ad - An added feature of the 5911a is a removable magnetic end with a 1/4 inch square drive - when removed, the Drain Plug Pro becomes a flexible shaft 1/4 inch bit driver. Does not fit 2011+, civic, del sol, fit hybrid, prelude, element, cr-x, civic hybrid, fcx clarity, civic gx, Fit, including Accord, CR-Z Hybrid, Crosstour, Accord Hybrid, Accord Crosstour, Ridgeline, Pilot, CR-Z, Insight Hybrid, S2000 and many motorcycle models.

Value pack of 20: don't spend more than you have to on overpriced OEM parts - our value pack of 20 is an excellent value whether you're a professional mechanic or simply someone who likes to do it yourself! This oil filter socket wrench is 65mm when measured from a cornered line to the opposite cornered line.

Lisle 19732 Plastic Oil Dispenser - 6 Quarts #ad - Wide application-the oil filter wrench fits toyota, is350, avalon, highlander 4 cyl, celia, echo, solara, prius, scion, xa, ls600h l, V6 MR2, sienna, yaris; scion, Tercel, corolla, nissan, gs350, lexus, V6, tc, ls460, Honda, paseo, xd; lexus es350, gs300, GS450h, and Infinite. Use with sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened.

The toyota oil filter wrench fits toyota tundra v8, RAV4, Camry 4 Cyl, IS250, xB, RX350, RX7. Save effort-remove the oil filter cap faster, and easier. Even if the oil filter cap is extremely tight, safer, our Toyota oil filter cup helps complete the job effortlessly. Durable-the oil filter removal tool can bear tremendous pressure and won't slip nor crack.

The welding of the joint is strengthened to make sure its durability while cheaply made oil filter wrench cracks easily when you torque.

#ad



Motivx Tools Oil Filter Wrench for Toyota, Lexus, and Scion 2.0 To 5.7 Liter Engines with 64mm Cartridge Style Oil Filter System - Perfect for Camry, RAV4, Tacoma, Highlander, Sienna, Tundra, and More

#ad
Motivx Tools MX2320 #ad - That's why our toyota oil filter wrenches are forged from high quality 6061 T5 aluminum so they won't crack like cheaper cast aluminum or flex and damage the plastic cap like stamped steel versions. Excellent finish - our oil filter wrenches are not only built tough, but the surface is treated with a high quality black anodized finish to prevent corrosion and theyre laser engraved with the Motivx Tools logo.

Professional quality - motivx tools is a family owned and operated specialty tool company located in the United States and we take great pride in our products. Marked in both quarts and liters. Why the motivx tools oil filter wrench is better -We only use high quality 6061 T5 aluminum to construct our wrenches as opposed to lower cost, lower quality materials.

Motivx Tools Oil Filter Wrench for Toyota, Lexus, and Scion 2.0 To 5.7 Liter Engines with 64mm Cartridge Style Oil Filter System - Perfect for Camry, RAV4, Tacoma, Highlander, Sienna, Tundra, and More #ad - Allows color matching of caps for dedicated adapters. Cooling system fill kit prevents spills and trapped air. Casting aluminum is much less expensive than forging but the result is a significantly weaker tool more prone to cracking and failure. Our washers meet or exceed the quality of OEM gaskets based on in-house testing.

This wrench does not work on vehicles with traditional canister filters that you unscrew and throw away and does not fit the 1. 8l engine oil filter cap. Built to last - toyota oil filter caps can be extremely tight causing tremendous pressure to be put on the wrench.

#ad



Lisle 63600 Oil Filter Tool

#ad
Lisle 63600 #ad - This oil funnel threads onto the engine in place of the oil filler cap - fits most late model Ford vehicles that use the 1/4 turn style oil filler cap, not for engines with the threaded style cap. Wide compatibility: these washers are compatible with most honda models, hr-v, passport, insight, civic si, odyssey, cr-v only pre-2011.

An added feature of the 5911a is a removable magnetic end with a 1/4 inch square drive - when removed, the Drain Plug Pro becomes a flexible shaft 1/4 inch bit driver. Works in tight spots from the front of the filter using 3/8 inch drive. Designed for repetitive daily use and backed with a Lifetime Warranty.

The flexible 8 inches pouring spout enables easy transfer of liquid. The flexible shaft can be used in virtually any location and held at just about any position and still thread or unthread the plug as desired - all while keeping your hand out of the oil stream. Our washers meet or exceed the quality of OEM gaskets based on in-house testing.

Lisle 63600 Oil Filter Tool #ad - Please note: this product is produced by mission automotive Parts. This extra large range enables this wrench to fit most of all import car filters plus the common 3 inch domestic car filters. Marked in both quarts and liters. We have no affiliation with or endorsement from any of the other manufacturers mentioned.

This versatile tool magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping or getting burned by hot oil.

#ad