Loctite 135423 Black 380 Toughened Max Instant Adhesive, 1 oz Bottle – 38050

#ad
Loctite 135423 #ad - Bottle Hazmat Product. Toughened products provide superior impact resistance and shear strength. Additional shipping charges may apply. Full cure: 24 Hrs. Loctite's prism series instant adhesives are the highest performance instant adhesives available to the industry. Black. Product: 380 typical use: close Fitting Parts Color: Black Gap Fill: 0

006" resin base: ethyl viscosity cp: 200 strength psi tensile shear: 3, 750 Temperature Range: -65°F - 225°F Cure Speed Fixture: 90 Sec. 1 oz. Use on close fitting parts. All hazmat items are non-refundable and non-returnable, and must ship via ground carrier. Provide superior impact resistance and shear strength.

#ad



Loctite 48040 Black 480 Prism Instant Adhesive, Toughened, 0.7 oz, 20 g

#ad
Loctite HL135466 #ad - Excellent Peel Strength. Nsf-61 approved. Rubber Toughened. Loctite 480 is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. 20 gram Bottle. Black Color. Low Viscosity.

#ad



Loctite 22221 Purple 222MS Low Strength Thread Locker, 10 mL Bottle

#ad
Loctite 22221 #ad - Controlled lubricity for accurate clamp loads. Low Viscosity. Controlled lubricity for accurate clamp loads. Excellent Peel Strength. Rubber Toughened. Nsf-61 approved. Loctiter 222mstm thread locker is ideal for fastener diameters of 1/4" 6mm and smaller. Ideal for fastener diameters of 1/4" and smaller. Black Color.

Parts can be separated using hand tools. Parts can be separated using hand tools.

#ad



Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL

#ad
Henkel Asia Paciffic & China Headquarters #ad - For disassembly, shear with standard hand tools and remove with methylene chloride. Preparation Protect work area. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. Disassemble while hot. Parts to be sealed must be clean and dry. Ideal for fastener diameters of 1/4" and smaller.

Shake the product thoroughly before use. Cures reliably even on stainless steel. Low Viscosity. There is only half of the bottle, but the contents are 50ml. Excellent Peel Strength. A large 120ml container was filled with 50ml of contents. Nsf-61 approved. Sets in approximately 10 minutes and fully cures in 24 hours.

Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL #ad - Assemble parts and tighten as required. Cleanup clean adhesive residue immediately with a damp cloth. Parts can be disassembled with hand tools. Controlled lubricity for accurate clamp loads. Temp range -65 to 300 degrees F.

#ad



Loctite LOC-18396 1.75 fl oz Bottle of 770 Prism Primer for Use with Loctite Cyanoacrylate Adhesive SHIP GROUND ONLY ORM-D

#ad
Loctite 18396 #ad - Rubber Toughened. N-heptane base. Protects threads from rust and corrosion. Low Viscosity. Parts can be separated using hand tools. Dries to touch in 12 minutes. Nsf-61 approved. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

Loctite LOC-18396 1.75 fl oz Bottle of 770 Prism Primer for Use with Loctite Cyanoacrylate Adhesive SHIP GROUND ONLY ORM-D #ad - Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Color: Clear. Temp range -65 to 300 degrees F. Fluorescent under UV light/black light. Tolerant of oil and other contamination. Especially for polyolefin such as PE and pp. Controlled lubricity for accurate clamp loads. Ideal for fastener diameters of 1/4" and smaller.

Full 24 hrs. Size: 1. 75 oz bottle.

#ad



Instant Adhesive, 3g Tube, Black

#ad
Loctite 41004 #ad - Instant adhesive, container type Tube, Color Black, Size 3g, Application Time 90 sec.008 in. Parts can be separated using hand tools. Nsf-61 approved. Color: Clear. Parts can be disassembled with hand tools. Functional cure Not Specified, Full Cure 24 hr. Tolerant of oil and other contamination. Dries to touch in 12 minutes.

Low Viscosity. Protects threads from rust and corrosion. 07, viscosity 3500 cps, tensile strength 3200 psi, characteristics increased flexibility and peel Strength With Enhanced Resistance To Shock, Adheres To Bonds Metals, Chemical Type Cyanoacrylate, Plastics, And Rubbers, VOC Content 20g/L, Standards 29 CFR 1910.

Instant Adhesive, 3g Tube, Black #ad - Ideal for fastener diameters of 1/4" and smaller. Rubber Toughened. Cure speed 15 min. Controlled lubricity for accurate clamp loads. Manufacturer: Loctite. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

Permanently locks studs and press fits.

#ad



Glue 50 ML - Suitable for All Metal Threaded Assemblies - Genuine Henkel Loctite 222 Threadlocking Adhesive - Low Strength - Easy Disassembly

#ad
Henkel India Pvt. Ltd. SG_B072JTXPG6_US #ad - The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. Loctite 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Prevents loosening on vibrating assemblies, e. G. Low Viscosity.

. Especially suited to small thread sizes. Tolerant of oil and other contamination. Dries to touch in 12 minutes. Please note: the volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment. Nsf-61 approved. Protects threads from rust and corrosion.

Glue 50 ML - Suitable for All Metal Threaded Assemblies - Genuine Henkel Loctite 222 Threadlocking Adhesive - Low Strength - Easy Disassembly #ad - Country of manufacture: United States. Aluminium or brass. Engine oils, corrosion prevention oils and cutting fluids. Warning always read material safety data sheet and technical data sheet before using the product. Color: Clear. Pumps, gear boxes or presses. Parts can be disassembled with hand tools.

#ad



Loctite 495 Super Bonder 442-49550 1oz Instant Adhesive, Clear Color

#ad
Loctite HL49550 #ad - Ideal for multi-purpose. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

Loctite 495 Super Bonder 442-49550 1oz Instant Adhesive, Clear Color #ad - Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Parts can be disassembled with hand tools. Cure speed 15 min. Especially suited to small thread sizes. Color: Clear. 0004" gap fill. Rubber Toughened. Fix cure time 20 seconds and full cure time 24 hour at the temperature of 77 degrees fahrenheit.

Testing and approvals are Commercial item Standard A-A-3097, American Bureau of Shipping. Cures reliably even on stainless steel. Dries to touch in 12 minutes. Nsf-61 approved.

#ad



Threadlocker 271, 10mL Bottle, Red

#ad
LOCTITE #ad - Color: Clear. Easy to use. Cures reliably even on stainless steel. Especially suited to small thread sizes. Designed to bond rubber, metal and plastic parts with gaps to 0004". Dries to touch in 12 minutes. Protects threads from rust and corrosion. Full 24 hrs. Size: 1. 75 oz bottle. Pumps, gear boxes or presses. Range: -65 degrees to 300 degrees f flash point: greater than 93.

Threadlocker 271, 10mL Bottle, Red #ad - 3 degrees c threadlocker Disassembly: Permanent Specific Gravity: 1. 1 threadlocker classification: threadlocker viscosity: 500 cp Threadlocker Strength: High Threadlocker Container: Bottle Threadlocker Color: Red Series: 271 Physical Form: Liquid Application Time: 10 min. Country of origin subject to change: United States.

Prevents loosening on vibrating assemblies, e. G. Tolerant of oil and other contamination. Range -65 degrees to 300 degrees F, Flash Point Greater Than 93. 3 degrees c, Specific Gravity 1. 1, viscosity 500 cp, removable With Heat and Tools ' Low Viscosity. Prevents loosening from shock and vibration.

#ad



LOCTITE 76820 CLEAN UP SOLVENT, BOTTLE, 175 FL OZ

#ad
LOCTITE 76820 #ad - Cure speed 15 min. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws. Permits disassembly with hand tools. Easy to use. Us rohs compliant: Yes. Designed to bond rubber, metal and plastic parts with gaps to 0004". Price for: each cleaner type: adhesive remover cleaner Applications: Industrial Dispensing Method: Bottle Volume: 1.

75fl. Oz. Application temp. Excellent Peel Strength. Loctite 76820 clean up solvent, bottle, 175 fl oz low Viscosity. Full 24 hrs. Size: 1. 75 oz bottle. Rubber Toughened. Dries to touch in 12 minutes. Cures reliably even on stainless steel. Price for: each full cure: 24 hr. Prevents loosening on vibrating assemblies, e. G. Parts can be separated using hand tools.

#ad



Dow Corning Molykote 33 Medium Grease Lubricant 5.3oz 150g Tube

#ad
Dow Corning 10 #ad - Good shear stability. Wide service temperature range: -100ºf to 400ºF -73ºC to 204ºC. Country of manufacture: United States. Price for: each cleaner type: adhesive remover cleaner Applications: Industrial Dispensing Method: Bottle Volume: 1. 75fl. Oz. Manufacturer: Loctite. Adhesives & Sealants. Low evaporation. High oxidation resistance.

Dow Corning Molykote 33 Medium Grease Lubricant 5.3oz 150g Tube #ad - A phenyl-methyl silicone grease with lithium stearate for extremely low to high temperature applications, -100ºF to 400ºF -73ºC to 204ºC. Prevents loosening on vibrating assemblies, e. G. Application temp. Protects threads from rust and corrosion. Pumps, gear boxes or presses. Color: Clear. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws.

Designed to bond rubber, metal and plastic parts with gaps to 0004". Safe for o-rings and other epdm, Buna, Rubber and Plastic Seats/Seals/Gaskets. Excellent Peel Strength.

#ad